ISO 683-15:1992 |
|
Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines. |
|
ISO 4126-1:2004 |
|
Safety devices for protection against excessive pressure - Part 1: Safety valves. |
|
ISO 4401:1994 |
|
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces. |
|
ISO 4411:1986 |
|
Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics. |
|
ISO 4422-4:1997 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 4: Valves and ancillary equipment. |
|
ISO 5208:1993 |
|
Industrial valves; pressure testing of valves. |
|
ISO 5209:1977 |
|
General purpose industrial valves; Marking. |
|
ISO 5210:1991 |
|
Industrial valves; multi-turn valve actuator attachments. |
|
ISO 5211:2001 |
|
Industrial valves - Part-turn actuator attachment. |
|
ISO 5599-1:2001 |
|
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector. |
|
ISO 5599-2:2001 |
|
Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector. |
|
ISO 5599-3:1990 |
|
Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions. |
|
ISO 5752:1982 |
|
Metal valves for use in flanged pipe systems; Face-to-face and center-to-face dimensions. |
|
ISO 5781:2000 |
|
Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces. |
|
ISO 5996:1984 |
|
Cast iron gate valves. |
|
ISO 6002:1992 |
|
Bolted bonnet steel gate valves. |
|
ISO 6182-1:2004 |
|
Fire protection - Automatic sprinkler systems - Part 1: Requirements and test methods for sprinklers. |
|
ISO 6182-2:1993 |
|
Fire protection; automatic sprinkler systems; part 2: requirements and test methods for wet alarm valves, retard chambers and water motor alarms. |
|
ISO 6182-3:1993 |
|
Fire protection; automatic sprinkler systems; part 3: requirements and test methods for dry pipe valves. |
|
ISO 6182-4:1993 |
|
Fire protection; automatic sprinkler systems; part 4: requirements and test methods for quick-opening devices. |
|
ISO 6182-5:1995 |
|
Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves. |
|
ISO 6263:1997 |
|
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces. |
|
ISO 6264:1998 |
|
Hydraulic fluid power - Pressure-relief valves - Mounting surfaces. |
|
ISO 6403:1988 |
|
Hydraulic fluid power; valves controlling flow and pressure; test methods. |
|
ISO 6552:1980 |
|
Automatic steam traps; Definition of technical terms. |
|
ISO 6553:1980 |
|
Automatic steam traps; Marking. |
|
ISO 6554:1980 |
|
Flanged automatic steam traps; Face-to-face dimensions. |
|
ISO 6704:1982 |
|
Automatic steam traps; Classification. |
|
ISO 6948:1981 |
|
Automatic steam traps; Production and performance characteristic tests. |
|
ISO 7121:1986 |
|
Flanged steel ball valves. |
|
ISO 7244:1984 |
|
Air distribution and air diffusion; Aerodynamic testing of dampers and valves. |
|
ISO 7259:1988 |
|
Predominantly key-operated cast iron gate valves for underground use. |
|
ISO 7368:1989 |
|
Hydraulic fluid power; two-port slip-in cartridge valves; cavities. |
|
ISO 7508:1985 |
|
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure; Basic dimensions; Metric series. |
|
ISO 7714:2000 |
|
Agricultural irrigation equipment - Volumetric valves - General requirements and test methods. |
|
ISO 7790:1997 |
|
Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions. |
|
ISO 7841:1988 |
|
Automatic steam traps; determination of steam loss; test methods. |
|
DIN ISO 7967-3:1993 |
|
Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms. |
|
ISO 8233:1988 |
|
Thermoplastics valves; torque; test method. |
|
ISO 8242:1989 |
|
Polypropylene (PP) valves for pipes under pressure; basic dimensions; metric seriess. |
|
ISO 8659:1989 |
|
Thermoplastics valves; fatigue strength; test method. |
|
ISO 9393-1:2004 |
|
Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General. |
|
ISO 9393-2:1997 |
|
Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves. |
|
ISO 9635:1990 |
|
Irrigation equipment; hydraulically operated irrigation valves. |
|
ISO 9644:1993 |
|
Agricultural irrigation equipment; pressure losses in irrigation valves; test method. |
|
ISO 9911:1993 |
|
Agricultural irrigation equipment; manually operated small plastics valves. |
|
ISO 9952:1993 |
|
Agricultural irrigation equipment; check valves. |
|
ISO 10418:2003 |
|
Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems. |
|
ISO 10423:2003 |
|
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment. |
|
ISO 10497:2004 |
|
Testing of valves - Fire type-testing requirements. |
|
ISO 10522:1993 |
|
Agricultural irrigation equipment; direct-acting pressure-regulating valves. |
|
ISO 10631:1994 |
|
Metallic butterfly valves for general purposes. |
|
ISO 10931-4:1997 |
|
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 4: Valves. |
|
ISO 10933:1997 |
|
Polyethylene (PE) valves for gas distribution systems. |
|
BS ISO 6263:1997 |
|
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces. |