DIN 475-1 |
|
Widths across flats for bolts, screws, valves and fittings. |
|
DIN 475-2 |
|
Wrench and socket openings. |
|
DIN 477-1 |
|
Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets. |
|
DIN 477-4 |
|
Compressed gas cylinder valves; swing check valves for camping-cylinders. |
|
DIN 477-5 |
|
Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections. |
|
DIN 477-6 |
|
Gas cylinder valves; test pressures 300 bar and 450 bar, with cylindrical thread for valve stem and gas cylinder neck for breathing apparatus; sizes, threads. |
|
DIN 477-9 (Draft standard) |
|
Gas cylinder valves, for highest grade gases; sizes, connections, threads. |
|
DIN 1690-10 |
|
Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves. |
|
DIN 3202-4 |
|
Face-to-face and center-to-face dimensions of valves; Valves with female thread connection. |
|
DIN 3202-5 |
|
Face-to-face and center-to-face dimensions of valves; valves for connection with compression couplings. |
|
DIN 3230-3 |
|
Technical delivery conditions for valves; Compilation of test methods. |
|
DIN 3230-4 |
|
Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing. |
|
DIN 3230-5 |
|
Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing. |
|
DIN 3230-6 |
|
Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids. |
|
DIN 3266-1 |
|
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves. |
|
DIN 3266-2 |
|
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing. |
|
DIN 3320-1 |
|
Safety valves; safety shut-off valves; definitions, sizing, marking. |
|
DIN 3320-3 (Draft standard) |
|
Safety valves; safety shut-off valves; center for face dimensions of flanged safety valves to PN 40 and to DN 250 inlet. |
|
DIN 3339 |
|
Valves; body component materials. |
|
DIN 3352-1 |
|
Gate Valves; General Information. |
|
DIN 3352-2 |
|
Cast iron gate valves, with metallic seat and inside screw stem. |
|
DIN 3352-3 |
|
Cast iron gate valves, with metallic seat and outside screw stem. |
|
DIN 3352-4 |
|
Cast iron gate valves with elastomeric obturator seatings and inside screw stem. |
|
DIN 3352-5 |
|
Steel gate valves, isomorphs series. |
|
DIN 3352-13 |
|
Double-socket cast iron gate valves, with elastomeric obturator seat and inside screw stem. |
|
DIN 3356-1 |
|
Globe valves; General data. |
|
DIN 3356-2 |
|
Globe valves; Cast iron stop valves. |
|
DIN 3356-3 |
|
Globe valves; Unalloyed steel stop valves. |
|
DIN 3356-4 |
|
Globe valves; High temperature steel stop valves. |
|
DIN 3356-5 |
|
Globe valves; Stainless steel stop valves. |
|
DIN 3357-1 |
|
Metal ball valves; general requirements and methods of test. |
|
DIN 3357-2 |
|
Full bore steel ball valves. |
|
DIN 3357-3 |
|
Reduced bore steel ball valves. |
|
DIN 3357-4 |
|
Full bore nonferrous metal ball valves. |
|
DIN 3357-5 |
|
Reduced bore nonferrous metal ball valves. |
|
DIN 3381 |
|
Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices. |
|
DIN 3399 |
|
Gas low-pressure cut-off valves; safety requirements, testing. |
|
DIN 3441-1 |
|
Unplasticized polyvinyl chloride (PVC-U) valves; requirements and testing. |
|
DIN 3441-2 |
|
Unplasticized polyvinyl chloride (PVC-U) valves; ball valves; dimensions. |
|
DIN 3441-3 |
|
Unplasticized polyvinyl chloride (PVC-U) valves; diaphragm valves; dimensions. |
|
DIN 3441-4 |
|
Valves of Rigid PVC (Unplasticized or Rigid Polyvinyl Chloride); Y-valves (Inclined-seat Valves), Dimensions. |
|
DIN 3441-5 |
|
Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions. |
|
DIN 3441-6 |
|
Unplasticized polyvinyl chloride (UPVC) valves; gate valves with inside screw stem; dimensions. |
|
DIN 3442-1 |
|
Polypropylene (PP) valves; requirements and testing. |
|
DIN 3442-2 |
|
Fittings of PP (Polypropylene); Ball valves, Dimensions. |
|
DIN 3442-3 |
|
Polypropylene (PP) valves; diaphragm valves; dimensions. |
|
DIN 3475 |
|
Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing. |
|
DIN 3476 |
|
Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings - Requirements and testing. |
|
DIN 3500 |
|
PN 10 piston type gate valves for use in drinking water supply systems. |
|
DIN 3502 |
|
Stopvalves for drinking water supplies on and in private property; straight pattern globe valves with oblique bonnet, rated for nominal pressure PN 10. |
|
DIN 3512 |
|
Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW. |
|
DIN 3535-1 |
|
Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests. |
|
DIN 3535-5 |
|
Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work. |
|
DIN 3535-6 |
|
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibers, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains. |
|
DIN 3537-1 |
|
Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing. |
|
DIN 3543-1 |
|
Metal tapping valves; requirements, testing. |
|
DIN 3543-2 |
|
Metallic tapping stop valves; dimensions. |
|
DIN 3543-3, Publication date:1978-07 |
|
PVC tapping valves for plastic pipes; dimensions. |
|
DIN 3543-4 |
|
High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions. |
|
DIN 3544-1 |
|
High-density polyethylene (HDPE) valves; tapping valves; requirements and test. |
|
DIN 3852-1 |
|
Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions. |
|
DIN 3852-2 |
|
Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions. |
|
DIN 3852-11 |
|
Stud ends and tapped holes for use with compression couplings, valves and screw plugs - Type E stud end dimensions. |
|
DIN 19208 |
|
Flow measurement; mating dimensions and application of shut-off valves for differential pressure transducers and differential pressure piping. |
|
DIN 19578-1 |
|
Stop valves for site drainage systems; anti-flooding valves for faucal sewage systems; requirements. |
|
DIN 20042 |
|
Water valve, nominal pressure 40 - Dimensions and requirements. |
|
DIN EN 28233 |
|
Thermoplastics valves; torques; test method (ISO 8233:1988). |
|
DIN 30677-1 |
|
Corrosion protection of buried valves; coating for normal requirement. |
|
DIN 30677-2 |
|
External corrosion protection of buried valves; heavy-duty thermoset plastics coatings. |
|
DIN 32509 |
|
Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests. |
|
DIN 42560 |
|
Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing. |
|
DIN 74279 |
|
Air braking systems - Charging valves. |
|
DIN 86251 |
|
Shut off valves for shipboard use, of cast iron, with flanges, DN 15 to 500. |
|
DIN 86252 |
|
Non return valves for shipboard use, cut off type, of cast iron, with flanges, DN 15 to 500. |
|
DIN 86260 |
|
Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500. |
|
DIN 86261 |
|
Non return valves for shipboard use, cut off type, of gun metal, with flanges, DN 15 to 500. |
|
DIN 86501 |
|
Valves, screwed bonnet type of gun metal with 24?-connection with port end W according to DIN 3861. |
|
DIN 86528 |
|
Tab washers for screwed bonnet valves. |
|
DIN 86552 |
|
Valves, screwed bonnet type of steel with 24?-connection with port end W according to DIN 3861. |
|
DIN 86720 |
|
Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16. |
|
DIN 87101, Publication date:2003-10 |
|
Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10. |
|
DIN 87901 |
|
Sniffle valves for pumps. |
|
DIN EN 488 |
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003. |
|
DIN EN 558-1 |
|
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems - PN designated valves. |
|
DIN EN 558-2 |
|
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems - Class-designated valves. |
|
DIN EN 736-1 |
|
Valves - Terminology - Types of valves. |
|
DIN EN 736-2 |
|
Valves - Terminology - Part 2: Definition of components of valves. |
|
DIN EN 736-3 |
|
Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001. |
|
DIN EN 917 |
|
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak-tightness. |
|
DIN EN 1092-1 |
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated. |
|
DIN EN 1092-2 |
|
Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges. |
|
DIN EN 1092-4 |
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges. |
|
DIN EN 1680 |
|
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism. |
|
DIN EN 1705 |
|
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996. |
|
DIN EN 28233 |
|
Thermoplastics valves; torques; test method (ISO 8233:1988). |